How To Change Ip Address Of My Laptop Windows 8

Sometimes, it's better to assign a PC it's own IP address rather than letting your router assign ane automatically. Bring together u.s.a. as we accept a look at assigning a static IP address in Windows.

Static vs. Automatic IP Addressing

Correct at present, the IP addresses for your PCs and other devices are probably assigned automatically by your router using a procotol known as Dynamic Host Configuration Protocol (DHCP). Information technology'due south a handy way for devices to connect to your network more easily, because you don't have to configure IP addressing for each new device yourself. The downside to automatic addressing is that information technology'south possible for a device's IP accost to change from time to fourth dimension.

Mostly, that'due south not a large bargain, but there are times that yous might want a device to have a static, unchanging IP address. For instance:

• Y'all have a device (like a home media server, say) that you want to be able to find reliably and yous (or other devices) prefer to locate it by IP address. Using IP addresses is ofttimes much handier when troubleshooting your network, for instance.
• You have certain apps that tin just connect to network devices using their IP address. In item, many older networking apps suffer this limitation.
• Yous forward ports through your router to devices on your network. Some routers play prissy with port forwarding and dynamic IP addresses; others practice not.

Whatever your reason, assigning static IP addresses to devices is not difficult, but you do have a choice to make—whether to do it from the router or on the device itself.

Assign Static IP Addresses Via Your Router

While this article covers assigning static IP addresses to PCs within Windows itself, at that place is another way to go about it. Many routers allow you to assign a pool of IP addresses that are handed out to specific devices (based on the device's physical, or MAC address). This method offers a couple of significant advantages:

• IP addresses are nonetheless managed by the router, meaning that y'all won't have to brand (and continue up with) changes on each private device.
• It's easier to assign addresses inside the same IP address pool your router uses.

RELATED: How to Set up Static IP Addresses On Your Router

This commodity is about assigning static IP addresses directly to PCs running Windows. We've already got a slap-up guide on How to Set Static IP Addresses On Your Router, so if that's the way you lot want to go, be sure to give it a read.

With all that in listen, though, let'due south take a look at how to assign static IP addresses inside Windows XP, Vista, 7, 8, and 10.

Set a Static IP Accost in Windows seven, viii, or 10

To change the computer's IP accost in Windows, you'll need to open the "Network Connections" window. Hitting Windows+R, type "ncpa.cpl" into the Run box, and so hitting Enter.

In the "Network Connections" window, right-click the adapter for which you lot desire to set a static IP address, and then select the "Properties" command.

In the properties window for the adapter, select "Cyberspace Protocol Version 4 (TCP/IPv4)" and then click the "Properties" button.

Select the "Use the following IP address" option, so blazon in the IP accost, subnet mask, and default gateway that corresponds with your network setup. Next, type in your preferred and alternating DNS server addresses. Finally, select the "Validate settings upon leave" selection so that Windows immediately checks your new IP address and corresponding information to ensure that it works. When you're ready, click the "OK" button.

And and so close out of the network adapter's backdrop window.

Windows automatically runs network diagnostics to verify that the connectedness is good. If there are bug, Windows volition give you lot the selection of running the Network troubleshooting sorcerer. Nevertheless, if you do run into trouble, the wizard probable won't exercise you also much adept. Information technology's better to check that your settings are valid and try once more.

Set a Static IP Accost in Windows Vista

Irresolute your IP from DHCP to a Static accost in Vista is similar to other versions of Windows, only getting to the correct location is a scrap different. Open the Start Bill of fare, right-click on Network, and select Properties.

The Network and Sharing Middle opens…click on Manage network connections.

Right-click on the network adapter you lot want to assign an IP address and click Properties.

Highlight Internet Protocol Version 4 (TCP/IPv4) so click the Properties button.

Now change the IP, Subnet mask, Default Gateway, and DNS Server Addresses. When you lot're finished click OK.

Yous'll need to close out of Local Area Connection Backdrop for the settings to go into effect.

Open the Command Prompt and utilize the ipconfig command to verify that the changes were successful.

Gear up a Static IP Address in Windows XP

To set up a Static IP in Windows XP, right-click the "My Network Places" icon, and then select "Properties."

Correct-click the adapter for which you want to set the IP, and so select "Backdrop" from the context menu.

Select the "Internet Protocol (TCP/IP)" entry, and then click the "Backdrop" push.

Select the "Use the following IP address" pick. Type in the IP address, subnet mask, default gateway, and DNS server addresses you desire to use. When yous're finished, click the "OK" button.

Y'all will demand to close out of the adapter'south properties window before the changes go into outcome.

And you can verify your new settings by using the ipconfig command at the control prompt.

---

By and large, it's better to let most of your devices have their IP addresses assigned automatically by your router. Occasionally, though, you lot might want to prepare a static IP address for a particular device. While you can set static IP addresses straight on your devices (and this article has shown you how to do just that on Windows PCs), nosotros yet recommending setting up static IP addressing on your router if possible. Information technology volition but brand life easier.

Source: https://www.howtogeek.com/howto/19249/how-to-assign-a-static-ip-address-in-xp-vista-or-windows-7/

Posted by: wakefieldthedis1939.blogspot.com

Share this post