How To Set A Clean Tone On A Boss Katana 50 Amp

In this guide, nosotros will show yous how to use the Dominate Katana for the first fourth dimension. You'll learn how to register the device, and also the dissimilar means to set up and connect your amp. Follow the sections below to go started.

Annals the Dominate Katan a
Setup and connections
- Top panel
- Rear console

Before we go everything set up up, the first thing y'all'll need to practise is register your Dominate Katana amplifier using the Boss serial number. After registering the Katana amplifier, you'll become access to Boss production support, an extended warranty, training videos and clinic information. Follow the steps beneath to register the Dominate Katana, and so continue to setup and connections.

Log in to your Roland Backstage account. If y'all don't have one all the same, you tin create i here.
On your account home page, click My Gear, and select Register a Product.
Make full out the required information, including the serial number which is located on the back of the Katana and click Register.
- Go along your Sweetwater invoice handy, as you will need to enter the purchase date, method, and dealer (Sweetwater).

Click the image to register your Boss Katana

Return to top

Setup and connections

The Boss Katana amps and head are like to almost others. Unlike their traditional counterparts, however, in that location are a few settings on the Dominate Katana which set them apart from the residual. We'll cover some of the Boss Katana settings and connections, as well.

Return to top

The power control settings on the Boss Katana allow you control the power amp depending on where you're playing. No matter what information technology's prepare to, you can get the same blazon of loftier gain tone and response without needing to the output/master volume. For example, if yous're playing at a club, you might want to fix it to l watts. You'll get the same 50 watt tone when you lot're practicing at domicile and prepare it to 0.five watts. When the switch is set to Standby, it will mute the amp without needing to plow the unit of measurement off.

The Tone Setting buttons allow you to shop and recall your favorite tones on the wing. These tones could either be from the Boss Tone Central app, every bit well as the settings (with the exception of the chief book) on the amp itself. You tin can store a total of four tones on the Boss Katana-50 combo amp, and viii tones on the rest of the Katana serial.

The Panel push button allows yous to switch between channels. When the panel light is solid red, you can change the tones. When the panel lite is blinking, you're able to switch banks. If you're in panel mode (solid cherry), you won't be able to switch banks.
Press and agree the Tone Channel number where yous desire to save your tone.

Presence, Power Control & Cabinet Resonance

What Are Tone Setting and Channel Retentiveness

Amplifier Settings

How to Save Tone Settings and Presets

Return to top

Of import: The Speaker Output of the Katana Head must be continued to a speaker cab rated for at least 8ohms.

This connection allows yous to connect your headphones or, if your model doesn't accept a Line In connexion, into an interface. It'south very useful when y'all're practicing and don't want to wake up the neighbors. When a cable is continued to this jack, it bypasses the speaker and Ability Control knob.

Use a USB 2.0 B to A cable to connect to your reckoner. In one case the USB cable is continued, you can update the firmware, every bit well every bit create tones using the the Boss Tone Central app. Another characteristic of this amp is that, when a USB cablevision is connected, y'all can utilise it equally a two-channel audio interface to tape directly into your DAW, including the tone settings you've created on the amp.

The Katana series are class-compliant on Windows, significant boosted driver software is necessary. However, Mac users will need to download and install the driver software showtime before connecting to a calculator.

How to Record Through USB Into Estimator

You can connect an sound role player or mobile device using a standard ⅛" cable. This allows yous to do and play along with your favorite tracks. The Aux In will bypass the entire betoken chain, giving you a clean, unimpeded sound.

Stereo Expand

(Katana heads and 100 series amps only)

The Stereo Expand feature allows yous to connect two Boss Katana 100 serial amplifiers together and turns your mono rig into stereo. This is a great characteristic to fill out your mix or the room when you use modulation effects such as reverb, chorus, or delay.

Connect a TRS cable from the LINE OUT (Main) of one unit of measurement to the POWER AMP IN (Secondary) of the other.
Turn the Stereo Aggrandize switch to ON on both amps to engage Stereo Expand.
- Besides the Main volume and Power control, all settings will be bypassed.

If you take an external preamp or multi-effects pedal which already has an amplified point and don't need to access the built-in preamp, you lot can connect it to the Ability Amp In. This volition bypass every setting with the exception of the Master Volume and Power Control. If a cablevision is continued to the Power In jack too as the Input jack on the Boss Katana, the Ability In jack will be disabled.

(Katana heads and 100 series only)

The Effects Loop connections are great for more than simple setups, or if you want to use the Katana'south preamp. While furnishings may exist alright using the Power Amp In section, it's often better to apply the effects loop, particularly with time-based effects. Check out our article for more than information on how to employ an effects loop. Also, be sure to check out Boss'due south video below!

How and Why to Utilize the Furnishings Loop

(Katana Head and Artist models only)

Connect the MIDI Out of an external pedal to the MIDI In of the Boss Katana to control various settings such equally bank and channel switching. You can likewise control the level of specific effects, also. To specify a item MIDI channel, printing and hold ane of the Channel buttons then power the unit of measurement on. Past default, the Katana is set to MIDI Channel 1. For detailed instructions on how to control different features and MIDI CC messages, visit the Owner's Manual.

Expression pedals and pes controller

IMPORTANT: Latching footswitches must exist used, equally Momentary footswitches are incompatible.

Another great feature of the Boss Katana amplifier series is human foot control. With the exception of the Katana MINI and Katana AIR, yous can control almost annihilation on your Katana. With the exception of the Dominate Katana-50 MkII there are two foot command connections available. The GA-FC, which allows you to change between channels or effects, as well as an expression pedal connection (available on all Katana amplifiers) which allows yous to connect a switch controller or expression pedal (volume, wah, etc.)

For the about consistent performance, Dominate recommends the GA-FC Latching Human foot Controller for the GA-FC connections. ¼-inch TRS cables are required.
Connect an expression pedal like the Roland EV-5 to the EXP jack for volume and wah control.
You can switch both channels and banks on the Katana-50 MkII using 2 FS-5L latching pedals and a 14"-inch splitter cablevision.

How and Why to Use a GA-FC Footswitch

How and Why to Use an Expression Pedal

Return to top

How to Hook Upwardly Stomp Boxes

When you need help, Sweetwater has the answers!

Our knowledge base contains over 28,000 expertly written tech manufactures that will requite y'all answers and help you get the virtually out of your gear. Our pro musicians and gear experts update content daily to proceed you informed and on your way. Best of all, information technology's totally FREE, and it's just some other reason that y'all go more at Sweetwater.com.